- Sound Devices For Windows Xp Free Download
- Install Sound Device Xp
- Sound Device For Windows Xp Download
- Sound Device For Windows Xp
- Download Sound Device For Windows Xp
- Free Install Sound Device For Windows Xp
- Install Sound Device Windows Xp
Recently, some Windows 10 users may experiencing an audio problem - No Audio Output Device is Installed error. It can be caused by many possible factors, such as Windows 10 October 2018 update bugs, the audio devices is unknown, or audio drivers are missing. According to Microsoft, “An Intel audio driver was incorrectly pushed to devices via Windows Update”, incompatible audio drivers might be one of the causes as well.
Sound Recorder Plus is a software that allows you record from any sound device to PCM WAV, ACM WAV, MP3, WMA, OGG, APE audio files, fast and easy. Start to record when noise is detected, stop to record when silence is detected, limit/unlimit the size. FS Amilo Li 1705 - Windows XP drivers v.200711 Fujitsu-Siemens Amilo Li 1705 - Windows XP drivers (Audio,Graphic,Modem,LAN,WLan) All drivers are tested with Fujitsu-Siemens Amilo Li1705 notebook under Windows XP SP2 Profesional and works fine.
The solutions here will help you solve the sound problem caused by updating drivers, Windows Update, audio device with error code, no audio driver installed, or no audio device, etc.
Hope those solutions can help you to get the sound back.
The solutions are applicable to the sound problem in Windows 10/8.1/8/7/Vista/XP.
First of all, the most important thing is to create a system restore point in the Rescue Center of Driver Booster before you try the following solutions. If anything bad happens, you can restore your system to the state of the previous good restore point.
Free download to create a system restore point
Steps as follows:
Solution 1:Make Sure All External Conditions OK
If your computer suddenly has no sound, it may be a hardware issue and caused by some external factors.
1. Check your battery and volume, make sure you have turned on all volume controls.
2. Check the sound output device (external speaker, microphone, headphones, etc.)
Check if the audio output device is connected properly, and if the connection wire between the audio output device and the computer is in normal condition.
Check if the audio output device works normally. You can replace it with another headset to see if it works.
3. Some speakers, headphones, or apps have their own volume control. Please check them all and make sure the switch is turned on.
4. If you use desktop computer, please make sure you have plugged into the correct jacks.
Nik halik the thrillionaire pdf reader. For example:
Usually the jacks have color differences: green jack is for headphones, red one is for microphone. If there is no color difference, the corresponding hints will be given.
Jacks on front panel with color difference:
Jacks on back panel with color difference:
Jacks with no color difference:
Laptop two-in-one jack:
If there is no problem with all hardware or external issues, please read on.
Solution 2: Use the Tool Fix No Sound in Driver Booster
However, when No Audio Output Device is Installed error occurs, it will be more likely an internal problem. If you have installed the latest Driver Booster, you can automatically fix the sound problem as following steps:
Step 1: Open Driver Booster
Step 2: Click the Tools icon on the left side of the main screen
Step 3: Select the tool Fix No Sound.
Step 4: See if everything works.
College drop sage the gemini. The tool can fix the following problem:
- The audio service is turned off
- The audio device is disabled
- HDMI/DisplayPort audio output problem
- Switch audio output mode (AC97/HD Audio)
- The audio output device is changed
- The default audio output device is changed
If the tool fails to fix the sound problem, please try the Solution3.
Solution 3:Use Windows built-in Troubleshoot Feature
Windows 7 / Windows 8
Step1: Open Control Panel (Press “Windows + R”> Input “control” > Click “OK” > Set View by as Small icons to view all control panel items)
Step 2: Find and click“Troubleshoot”
Step3: Select“Troubleshoot audio playback”
Windows 10
Step 1: Right click the sound icon in the system tray
Step 2: Choose “Troubleshoot sound problems”
Step 3: After detecting, the related problem will be displayed, and please follow the instructions prompted to troubleshoot the problem.
Solution 4: Switch Audio Output Mode
Some sound problem is caused by changing the audio output mode (AC97/HD Audio), the following steps guide you to manually change the mode back.
Open Control Panel to see if there is Realtek HD Audio Manager.
- If there is no Realtek HD Audio Manager, please perform the Solution 6.
- If Realtek HD Audio Manager is in the Control Panel, please continue to perform the following steps.
Step1: Open Control Panel (set View by as Small icons refer to Solution 3)
Step2: Click Realtek HD Audio Manager in Control Panel.
Step3: Click the gear icon on the top right of the window and choose Option.
Step 4: Tick AC97 Front Panel and then check whether it fixes the no sound problem.
If Solution 4 fails to fix the problem, please try Solution 6.
Solution 5 : Other Realtek HD Audio Manager
If your have an older version of Realtek HD Audio, your Realtek HD Audio Manager Panel may look the same as the picture below. Please follow the instruction as it shows in the picture.
1. Click the file icon on the top right corner.
2. Tick the box of Disable front panel jack detection.
If the sound is still not working, you can try to use the Tool Fix No Sound of Driver Booster again to see how it works.
Solution 6:Uninstall Incorrect Driver
Windows Update and updating driver with other programs may cause audio device not working properly, audio device has error code. The followings steps will guide you to uninstall the current wrong driver.
Step 1: Open Device Manager (Press “Windows + R” > Input “devmgmt.msc” > Click “OK”)
Step 2: Expand Sound, video and game controllers, you will see the audio devices.
Step 3: Right click the related audio device* and choose Uninstall devices*.
Which audio device should be uninstall*:
- If your system use HDMI or DI (Display Port) to output the audio, you should have one of the three audio devices (NVIDIA High Definition Audio, AMD High Definition Audio, Intel(R) Display Audio), please uninstall the audio device you have.
- If your system does not use HDMI or DI (Display Port) to output the audio, please uninstall the other audio device (except NVIDIA High Definition Audio, AMD High Definition Audio, Intel(R) Display Audio) under Sound, video and game controllers.
Tips *:
During the uninstall process, please make sure to tick “Delete the Driver software for this device”.
For more information about HDMI or DP (Display Port).
Reboot your PC after uninstall to see if still any problem, if the problem remains, please try Solution 7.
Solution 7:Install a Correct Driver
If there is no driver installed for your audio device or your current driver is not correct, you can follow the steps below to install a right driver.
1. If the sound problem still exists after rebooting your PC, please try to update audio drivers as the steps below:
Step 1: Open Device Manager and expand Sound, video and game controllers (just re-perform the first 2 steps of solution 6).
Step 2: Right click the related audio device and choose Update driver to see if your audio system is back to normal.
Step 3: Click Search automatically for updated driver software to check the update for your driver.
2. If there is no audio device under Sound, video and game controllers, please follow the steps below:
Step 1: Find and expand Other devices
Step 2: Right click the devices under Other devices and choose Update driver to see if your system is back to normal.
3. If you have not use Driver Booster as a driver updater, you can try it with the easiest one-click solution to update drivers automatically.
Active the PRO version with a great offer below:
If the problem remains after the update, please re-perform Solution 4.
If you still have the problem after all steps above, please download DBInfoHelper > double click to run this tool > click 'Save report to Desktop' > find db_info_xxxx.zip on your desktop > send the zip file to dbfeedback@iobit.com
Solution 8:Get Back Your Audio Device
If there is no audio device in your Device Manager, you can try this solution.
Step 1: Go to Device Manager > click the Action tab > Choose “Add Legacy hardware”
Note: if there is only the Help option in the list after clicking Action, please click on a blank space around the list and then click on the 'Action' menu again
Step 2: Click “Next”to load “Add Hardware Wizard”
Step 3: Choose “Search for and install hardware automatically (Recommended)”> Click “Next”
Step 4: Click 'Next' (even if Wizard did not find any new hardware on your computer)
Step 5: Then you will see the Common hardware types > find and choose“Sound, video and game controllers”> click “Next”
Step 6: Select the manufacturer of the audio driver you want > click “Next”
Step 7: Click 'Next' to install the driver
Step 8: When you find back your audio device, please try the above solutions.
Appendix:How to Disable Driver Updates in Windows Update
We’ve received many feedback from our users that there was no sound after Windows update recently. In this case, we recommend temporarily turn off driver updates in Windows update.
Windows 10 Bluetooth 4.0 dongle driver.
Note: This does not apply to Windows 10 Home.
Sound Devices For Windows Xp Free Download
Step 1: Go to Windows support
Step 2: Click the text link Download the 'Show or hide updates' troubleshooter package now to download the tool
Install Sound Device Xp
Step 3: Open“wushowhide.diagcab” after the download > click “Next”
Step 4: Just wait
Step 5: Click “Hide updates”
Step 6: Select the update items you want to hide(recommend to hide all items) >click“Next”
Windows 7
Step 1: Take reference of the instructions
Step 2: Open Device Installing Settings and set up as shows below:
Windows 8/8.1
Go to Control Panel > System and Security > System > follow the steps in the following picture.
Sound Device For Windows Xp Download
Filed under: Windows XP
No modern PC can and should do without sound. Windows XP as well as a lot of applications use sounds to give feedback to the user, or to signal an event happening. And when you play an MP3 file or watch some video, you definitely want to hear sound from your speakers or headset. Another typical area where sound problems can come up is while making voice calls over the internet. Skype, AI, MSN, Yahoo, GoogleTalk, the all are very suited for voice calls.
When you are facing audio problems, a structured way of finding the cause can be helpful. We will skip the steps where you check if everything is plugged properly, since that should always be the case. If your audio card uses jack sensing technology, make sure you select the proper device when asked about it (when plugging devices). Follow the green = speakers, pink = microphone and things should be okay.
Sound Errors in Windows XP
In some cases you will see a concrete error that can help you fix the sound problem in Windows XP. The media player you are using can give an error, or you can check the Device Manager and see an error on the audio device.
Typical examples of sound errors in Windows XP are:
- WAV sound playback error detected
- Your audio hardware cannot play files like the current file
- No wave device that can play files in the current format is installed
- Windows Media Player cannot play the file
- This device cannot start. (Code 10)
- The drivers for this device are not installed. (Code 28)
It is also possible that there is no error, but:
- there is simply no sound
- the sound is not working for internet pages
- the sound only works on a headset and not on the (monitor) speakers
- sound is of bad quality
- surround sound is not working.
In all cases it could be an audio configuration problem, but often it is a driver problem. The best approach is to go through the steps below and check each aspect.
Steps to Fix Sound Problems
- If you have an onboard audio card, you need to make sure the onboard audio device is enabled in the Bios. Instruction will vary per motherboard, so you need to follow the instructions in your PC or motherboard manual for this. If you are using a separate sound card, the onboard should be disabled of course!
- In Windows XP, open the Device Manager (open the Control Panel -> double-click the System icon -> in System Properties dialog box, select Hardware tab -> click Device Manager button).
- In the Device Manager, open the “Sound, video and game controllers” group. Here you should see your audio device as shown in the image.
- If the sound device is not listed, check if any devices are listed in the “Other devices” or “Unknown devices” group, most likely with a yellow exclamation mark.
- If the device is not listed or if devices are listed under the “Unknown devices” group, the most likely cause is a missing or incorrect device driver. If you have the sound driver for the sound device, (re)install the sound drivers. If you do not have the drivers the easiest method is to use a driver update tool.
- If updating the drivers does not work, you need to find the cause of the problematic device.
- If the sound device is listed in the Device Manager, and you still do not have sound, first open the Control Panel.
- In the Control Panel, double-click “Sounds and Audio Devices”.
- In the first screen, with the Volume tab active, make sure the Mute checkbox is not selected and that the volume slider is close to High.
- Next, click the Advanced button, and in the Advanced Audio Properties dialog box, make sure you have a valid Speaker setup. At least make sure it is not set to “No speakers”. Click OK when done.
- Now click the Speaker Volume button. Both the Left and Right speaker volume should be close to High. Click OK when done.
- Next, select the Audio tab in the Sounds and Audio Devices Properties dialog box.
- In the Sound playback group, you want to set the Default device to your sound card device. Part of the name will normally match with the name you found in the device manager.
Also click the Volume button in the Sound playback group and adjust the Volumes to a high enough level. The Volume Control will show the mixer, which does depend on the audio device installed. The sample has a SoundMax audio card. Clear all the Mute checkboxes.
- You can repeat these steps for the MIDI music playback.
- Although not a frequent problem, check if the Audio Service is running:
- Select Administrative Tools in the Control Panel.
- Then double-click Component Services, which will open a separate window.
- In the left-hand pane, click Services (Local).
- In the right-hand pane, scroll down to the Windows Audio service and make sure it is not disabled. If necessary, right-click Windows Audio, in the popup menu select Properties and then set the startup type to Automatic.
- If you have sound problems in games, you can check the sound card resources. Especially older games have limited detection of sound cards in respect to resources (IRQ, I/O address range).
Test Sound with an Application
With these steps, you have checked and adjusted the sound setup in Windows XP. If sound problems still persist, chances are there are problems with the sound settings in the application you are using. If the sound problems are present for all applications, there probably is something wrong with the hardware.
The best application to test your sound setup with is the Windows Media Player, as it will use the standard Windows sound setup, which you just verified and adjusted.
One setting in the Windows Media Player that needs to be verified is the DirectSound device.
- Open the Windows Media Player.
- In the Media Player, select Options in the Tools menu (press the Alt key to show the menu if not visible).
- In the Options dialog box, select the Devices tab.
- Now select the Speakers device and click the Properties button.
- In the Speaker Properties dialog box, select the audio device to use for Sound playback. By default it will have Default DirectSound Device selected, but you can change it to the DirectSound device that is listed for your audio device.
Also clear the Use 24-bit audio for audio CDs for now to make sure that this Performance setting is not causing any problems.
- Click OK to close the Speaker Properties and then click OK again to close the Options dialog box.
For testing purposes, use an audio file that was installed with Windows XP. These audio samples are standard audio files, which do not require any additional or special audio codes.
Other applications that use sound will normally have a similar option to change the sound device selection and volume. For games, the sound setup is particularly sensitive. The right and latest device driver is often required.
Audio and Video Codecs
When a computer plays an audio or video file, it will decode the audio or video data to be played with the sound device. Each different audio and video format requires its own decoder, or codec. One of the possible problems with no sound is that the right audio codec or video codec is not installed.
Sound Device For Windows Xp
If your standard audio files do play, but a certain MP3, AVI or WMV file does not produce audio, the first thing to try is to install missing codecs. You can try and find out which codec is required and then find and install that code, but luckily there are a number of codec packages that can be downloaded and installed.
One of the most used codec packages is the K-Lite Codec Pack. With that installed most audio and video should play without problems … and with sound. There are more of course, a quick internet search can help you find others.
Find Out Which Sound Card Is Installed
Download Sound Device For Windows Xp
Knowing exactly what type of sound card is installed in your computer can be of great help in looking for solutions to sound problems. It can help you find the right sound driver, look up software and maybe help search the internet for more targeted problem descriptions based on manufacturer and model.
Free Install Sound Device For Windows Xp
One handy way of finding out which sound card is installed is to use a program like Belarc Advisor. It will analyze your system and tell you about your hardware and software.
Comments
@John – From what I know, upgrading to Windows 7 on your E1705 laptop might not be a good idea. You will only be able to run the 32-bit version, so there will not be much to gain. Driver support is even more limited, since many drivers are only available for Vista for that laptop, so you’ll need to see if they work.
I do think your audio hardware is fine, so it must indeed be a driver/software issue.
From what you describe, you could try uninstalling the audio driver, and then reboot. Windows should pick up the default audio driver for the on-board ICH7 audio.
If it does not work, try reinstalling the original Dell driver for your laptop. See if it works, or in an error message shows up.
One other thing. My Sigma Tel Audio was not shown in the “Sounds and Audio Devices Properties”/Audio/ Sound playback Default device UNTIL I went into the F2 Bios and did a “Restore to Factory Defaults.” THEN it showed up! But still no sounds when checking the Sounds tab/Program events/Asterisk, Critical Battery Alarm, Critical Stop, etc.
I tried other .wav files to see if the Windows .wav files were corrupt (or whatever) but still nothing would play when clicking ‘Play sound” button.
Hope this helps explain my problem.
Thanks in advance.Hi…I have Inspiron e1705 laptop with Windows XP and Sigma Tel Audio default device. I lost complete sound for some unknown reason. There was sound from the headphones, but that eventually was also lost.
F12 Diagnostics (Audio) plays great sound from my on board speakers, except for the mono test which failed.
Analog Sound Playback passed loud and clear during the audio test while using “Intel ICH7 HD Audio with ST9200.”
I have no idea what “Intel ICH7…” is nor where Win XP found this audio driver(?). I wish I could replace the Sigma Tel Audio CODEC with this Intel ICH7 HD Audio, but I can’t find it anywhere.
I followed all the above checks and fixes, even d/ling Windows Media Player 11 for XP, but no help.
Any suggestions please?
Would installing Windows 7 possibly fix my audio problem?
Thanks in advance.when i play music this is what it shows
Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your computer, it may be in use by another program, or it may not be functioning properly.@aktor edy – please install the operating system again. thank you this is the answer for you even works.
@aktor edy – What is your exact sound issue? Is the sound device visible and recognized in the Device Manager?
Your suggestion of a reg file, would be the same as as uninstalling the audio driver and then re-installing the audio driver, so try that instead.
For further help, please provide more details (e.g. motherboard or sound card model).
no work repair sound driver (SoundMax) pls alternative repair!? (example: reg file)
@Philp – Regarding the recording, have you made sure that the right audio input source is selected for the recording? By default this would be the line in or microphone input of the sound card, so you need to make sure you set the default recording input to the TV Card, or select it in the recording program.
The statement about the C-Media driver is not quite clear to me, how do you need to open it manually? Can you clarify that?My PC is an Advert T9404 which is preloaded with Medion BDA Analog Capture.
I presume this works in conjunction with the Medion SAA 7134 Capture Device.
The Device Manager of my Windows XP tells me that it is functioning OK and the driver is up to date.
My problem is that I can only capture video but not any sound. I know the sound is imputing as I can connect the anolog output to my TV with full sound as well as video.
Additionaly,I have C-Media Rear Panel Audio device driver cmudax (C-Media do not now exist according to the web) and this driver now has to be opened manually since a PC repairer re-installed XP on my C disk.
Can these problems be solved?@steve – The solutions in the article are the most common generic solutions to generic audio problems in Windows XP.
If you can let me know what your PC or audio card is, and what exactly the problem is, I might be able to give you further tips.thx 4 sharing with us but it didn’t work out for mi so please try to get for anothrer solution!!
@Basit – There are quite a few variations of the soundmax audio device, so can you tell me what your model of computer is? Or what motherboard?
If not possible, then at least list the hardware id of the audio device in the device manager.
That way I can check for you and make sure you get the right audio driver for the soundmax audio device.And i also tried to update the driver through internet but it’s not updating….
Hi, i have the same Sound Driver which is shown in the graphics like “SoundMAXIntegrated Digital Audio”. The problem is that since i have installed windows xp golden edition my sound is not working and in the control panel in sounds and audio devices the volume,Audio and Voice tabs are completely disabled but when i go to device manager there it shows that all the devices are working properly. i used windows 7 before but there was no any sound problem but in windows xp it gives me sound error. plz plz plz help me with this problem cause i m just got tired of solving this problem for two weeks….
i need which files and directories will be used for audio and mic, inside the windows xp operating system
Hi friends,
For my system audio files playing fine in media player while playing video’s sound breaking. I have tried different video players and also i have reinstalled audio drivers. Please suggent anybody………….
Leave a Reply
Categories
- How To
- PC Maintenance
Archives
Links
Meta
Install Sound Device Windows Xp
Software Tip
Now with 30% discount!Recent Comments
- on How to Check Your Memory in Windows
- on How to Update Your Computer BIOS
- on How To Fix Webcam Problems
- on How To Fix Webcam Problems
- on How To Fix Webcam Problems
Links
Sponsored Ads